Picatinny Rail Scope Mount for Remington 700, 722, 40X, Bergara B14 Short Action – 0 MOA
Quick Check: Confirm Your Rifle Model.
✅ Fits: Remington 700 Short Action, Remington 700 Ultimate Muzzleloader, Remington 722 Short Action, Remington 40X Short Action, Bergara B14 (#6 Screws), CVA Endura, and Christensen Arms Short Actions listed below.
Center Spread: 3.627" (Distance between the two middle holes).
Mounting Hardware Included: BOTH #6-48 and #8-40 Screws & T-10 Bit Included.
Compatibility: Rail is factory pre-drilled to accept both screw sizes.
Technical Specifications
- Rail Type: One Piece Picatinny
- Machined From: Domestic 6061 T6 Extruded Aluminum
- Finish: Matte Black Anodizing
- MOA: 0 MOA
- Center Spread: 3.627"
- Overall Length: 6.276"
- Height: 0.4" (Top of Receiver to Top of Picatinny)
- Weight: 2 oz
- Ambidextrous: Yes
- Quick Disconnect Ring Compatible: No
- Screw Compatibility: Accepts #6-48 and #8-40 screws
- Mounting Hardware Included: #6-48 Screws, #8-40 Screws, and T-10 Bit
- Torque Specs: 20 in/lbs (Blue Loctite recommended)
- Made in: USA
Compatible Rifles
- Remington 700 Short Action
- Remington 700 Ultimate Muzzleloader
- Remington 722 Short Action
- Remington 40X Short Action
- Bergara B14 (#6 Screws)
- CVA Endura
- Christensen Arms Ridgeline (Later Models) – Remington 700 Pattern Actions, Serial Numbers Starting With CV (#6-48 Screws)
- Christensen Arms Mesa – Remington 700 Pattern Actions, Serial Numbers Starting With CV (#6-48 Screws)
One-Piece Scope Bases Are the Best Choice
A one-piece scope base offers superior performance compared to traditional two-piece bases. By spanning the entire receiver, it eliminates alignment issues and provides a stronger, more stable mounting platform.
- ✔ Greater stability with fewer potential failure points
- ✔ Improved durability under recoil
- ✔ Better scope alignment and accuracy retention
- ✔ More flexibility for proper eye relief adjustment
- ✔ Ideal for hunting, precision shooting, and general use
Picatinny vs Weaver – Why Picatinny Is the Superior Choice
While Weaver-style bases were once common, Picatinny rails have become the modern standard due to their superior strength, consistency, and compatibility.
- ✔ Standardized slot spacing ensures universal compatibility
- ✔ Compatible with both Picatinny and Weaver rings
- ✔ Stronger and more durable under recoil
- ✔ Greater flexibility for optic placement
- ✔ Military-proven mounting system
For Remington 700 rifles, a Picatinny rail offers the best long-term reliability and performance.
For Remington 700 short action rifles, a one-piece Picatinny rail provides the most reliable and versatile mounting solution.
Why Choose a One-Piece Picatinny Rail?
- ✔ Greater stability than two-piece bases
- ✔ Improved durability under recoil
- ✔ More flexibility for optic positioning
- ✔ Compatible with Picatinny and Weaver rings
- ✔ Designed to handle calibers like .223, .308, and other short-action cartridges
#6 and #8 Screw Compatibility – No Modification Required
This rail is factory pre-drilled to accept both #6-48 and #8-40 screws. BOTH screw sizes are included, ensuring compatibility with factory and upgraded receivers without drilling, modification, or gunsmithing.
0 MOA vs 20 MOA
- 0 MOA: Ideal for hunting and shooting from 0–500 yards
- 20 MOA: Recommended for long-range shooting beyond 500 yards
Fitment Warning
This rail will NOT fit Howa 1500 or Weatherby Vanguard rifles due to differences in receiver geometry.
|
Specifications:
|
Rail Type: One Piece Picatinny |
|
Scope Mount Color:
|
Black Anodized Type II
|
|
Material:
|
6061 Aluminum
|
|
Model:
|
B14
|
|
Model:
|
B14R (Rimfire)
|
|
Model:
|
700
|
|
Model:
|
Endura
|
|
Brand:
|
CVA
|
|
Model:
|
722
|
|
Model:
|
40X
|
|
Brand:
|
Remington
|
|
Brand:
|
Bergara
|
|
Minute Of Angle:
|
0 MOA
|
|
Action Length:
|
Short Action
|
|
GTIN:
|
841370104970
|
|
Mount Series:
|
Standard
|
|
Pin Selection:
|
Pin Set
|
|
Mounting:
|
 |
