EGW GI 1911 Sight Mount (fits Burris FastFire, Docter, Viridian RFX25)

EGW

MSRP $49.99
$44.99
(You save $5.00 )
(No reviews yet) Write a Review
SKU:
EGW-49310

1911 GI Red Dot Mount – Fits Vortex Venom (Open Emitter), Viper, Burris FastFire, Docter Footprint

Quick Check: Confirm Your Rear Sight Cut.
✅ Fits: 1911 pistols with a G.I. style rear sight cut.
Mounting Hardware Included: Yes.
Compatibility: Fits Docter / FastFire / Viper / Venom footprint optics.
Important: This is a press fit mount. A sight pusher tool may be required.

Installation & Overview

Upgrade your 1911 with a G.I. style rear sight cut with a low-profile red dot mounting solution without permanent slide modification. This EGW mount replaces the factory rear sight, allowing you to install a red dot using the existing dovetail.

Designed for optics using the Docter footprint, this mount supports popular red dots like the Vortex Venom (open emitter), Vortex Viper, and Burris FastFire series. It creates a clean, direct-mounted setup for range use, defensive shooting, competition, or custom 1911 builds.

Machined from 7075 aluminum and finished in matte black hardcoat, this mount offers excellent strength while keeping added weight to a minimum. The direct dovetail design keeps the optic lower than many rail adapter setups for faster sight acquisition and a cleaner profile.

The mount is designed to install from left to right with the muzzle facing forward. The dovetail has a progressive taper to allow for easier installation and a secure fit. Due to manufacturing tolerances between firearms, minor fitting may be required.

Technical Specifications
  • Mount Type: Dovetail Red Dot Mount
  • Machined From: 7075 Aluminum
  • Finish: Matte Black Hardcoat
  • Overall Length: 1.811"
  • Overall Width: .99"
  • Dovetail Width: .347"
  • Fits Footprint: Docter / FastFire / Viper / Venom
  • Mounting Method: Press Fit Dovetail
  • Torque Specs: 15 in/lbs
  • Made in: USA

Compatible Pistols

  • 1911s with a G.I. style rear sight cut
  • Iver Johnson 1911A1
  • Iver Johnson 1911A1 9
  • Iver Johnson Falcon 45
  • Iver Johnson Thrasher 45
  • Iver Johnson Thrasher 9
  • Iver Johnson 1911A1 Chrome 38W
  • Iver Johnson 1911A1 Chrome 38P
  • Iver Johnson 1911A1 CHRW45
  • Iver Johnson 1911A1 CHR45P
  • Iver Johnson 1911A1 CHR45WP
  • Iver Johnson 1911A1 Zombie
  • Iver Johnson 1911A1 Copperhead
  • Iver Johnson 1911A1 Water Moccasin
  • Iver Johnson 1911A1 Boa
  • Iver Johnson 1911A1 Muddy Girl 9mm
  • Iver Johnson 1911A1 Digital Navy
  • Iver Johnson 1911A1 Digital Snow 45acp
  • SAR 2000

Compatible Red Dots

  • Viridian RFX25
  • Vortex Viper
  • Vortex Venom (Open Emitter)
  • Burris FastFire 1
  • Burris FastFire 2
  • Burris FastFire 3
  • Burris FastFire 4
  • Docter
  • ADE RD3-001
  • ADE RD3-002
  • ADE RD3-009
  • UTG Reflex Micro Dot
  • Crimson Trace CTS-1200
  • Crimson Trace CTS-1300
  • Sightmark Mini Shot
  • Cuda RX-795

Why Choose This EGW Mount?

  • ✔ No slide milling required
  • ✔ Replaces rear sight using the dovetail system
  • ✔ Machined from solid 7075 aluminum
  • ✔ Keeps the optic low compared to rail adapter setups
  • ✔ Designed for 1911 pistols with G.I. style rear sight cuts
  • ✔ Made in the USA

Mounting Hardware Included

  • (2) 6-32 x 3/8" Flat Head Cap Screws
  • (1) 6-32 x 3/16" Cup Point Set Screw
  • (2) 6-32 x 5/16" Button Head Screws

Installation Notes

  • Remove the factory rear sight
  • Install the mount in the dovetail
  • Secure with set screw if applicable
  • Install optic
  • Apply blue Loctite
  • Torque mounting screws to 15 in/lbs

Fitment Warning

This mount is designed specifically for 1911 pistols with a G.I. style rear sight cut. Verify your rear sight cut before purchasing. Due to manufacturing tolerances between firearms, minor fitting may be required.

 

 

Short Description:

Mounting Hardware is Included

This mount fits:
1911s with a G.I. style rear sight cut
Springfield 1911A1
Iver Johnson 1911A1
Iver Johnson 1911A1 9
Iver Johnson Falcon 45
Iver

Specifications:

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Torque Specs: 15 in/lbs

Mount

Scope Mount Color:
Black Hardcoat Anodized Type III
Material:
7075 Aluminum
Model:
G.I. Rear Sight Cut
Brand:
1911
Red Dot Brand:
Vortex Venom (not enclosed) / Viper
Red Dot Brand:
ADE RD3-001 / RD3-002 / RD3-006 / RD3-009 / RD3-012 / RD3-013 / RD3-015
Red Dot Brand:
Burris FastFire 1, 2, 3, 4
Red Dot Brand:
Crimson Trace CTS-1200 / CTS-1300
Red Dot Brand:
Docter
Red Dot Brand:
Cuda RX-795
Red Dot Brand:
Viridian RFX25
GTIN:
841370107100
Brand:
Colt
Brand:
Iver Johnson
Brand:
Remington
Brand:
Springfield

Videos Hide Videos Show Videos