Mounting Hardware is Included
This mount fits:
- Ruger MK I (Ruger Mark I)
- Ruger MK II (Ruger Mark II)
- Ruger MK III (Ruger Mark III)
- Ruger MK IV (Ruger Mark IV)
- Ruger P85
- Ruger P90-95
- Ruger P97
- Ruger 22/45
This mount doesn't fit:
- Ruger P89
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Flat Head Cap Screws - Provided for Trijicon RMR
The screws that are included with this mount require a 5/64'' allen wrench for installation.
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Alt Description:
- Ruger 22/45 RMR Mount
- Ruger Mark I RMR Mount
- Ruger Mark II RMR Mount
- Ruger Mark III RMR Mount
- Ruger Mark IV RMR Mount
- Ruger 22/45 Holosun 507c Mount
- Ruger Mark I Holosun 507c Mount
- Ruger Mark II Holosun 507c Mount
- Ruger Mark III Holosun 507c Mount
- Ruger Mark IV Holosun 507c Mount
- Ruger 22/45 Holosun 407c Mount
- Ruger Mark I Holosun 407c Mount
- Ruger Mark II Holosun 407c Mount
- Ruger Mark III Holosun 407c Mount
- Ruger Mark IV Holosun 407c Mount
- Ruger Mark I Red Dot Mount
- Ruger Mark II Red Dot Mount
- Ruger Mark III Red Dot Mount
- Ruger Mark IV Red Dot Mount
|
Short Description:
|
Mounting Hardware is Included |
|
Specifications:
|
Material: 7075 Aluminum |
|
Scope Mount Color:
|
Black Hardcoat Anodized Type III
|
|
Material:
|
7075 Aluminum
|
|
Model:
|
Auto (Mk I, Mk II, MK III, Mk IV, P85, P89, P90-P95, P97, 22/45
|
|
Brand:
|
Ruger
|
|
Red Dot Brand:
|
Holosun 507C
|
|
Red Dot Brand:
|
Holosun 508T
|
|
Red Dot Brand:
|
Holosun 407C
|
|
Red Dot Brand:
|
Trijicon SRO
|
|
Red Dot Brand:
|
Swampfox Justice
|
|
Red Dot Brand:
|
Swampfox Liberty
|
|
Red Dot Brand:
|
Swampfox Kingslayer
|
|
Red Dot Brand:
|
Viridian RFX35
|
|
Red Dot Brand:
|
Bushnell RXM-300
|
|
Red Dot Brand:
|
ADE Advanced Optics RD3 (Stingray, Raptor, Valkyrie)
|
|
Red Dot Brand:
|
Trijicon RMR HD
|
|
Red Dot Brand:
|
Holosun HS507Comp
|
|
Red Dot Brand:
|
Swampfox Justice II
|
|
Red Dot Brand:
|
Swampfox Liberty II
|
|
GTIN:
|
841370116522
|
