EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Bomar

MSRP $48.99
$44.99
(You save $4.00 )
(No reviews yet) Write a Review
SKU:
EGW49512

Mounting Hardware is Included

This is a press fit mount. Utilization of a sight pusher tool may be required.

This mount fits (including but not limited to):

  • STI Edge (either this sight or LPA)
  • Les Baer 1911 (adjustable rear sights)
  • Colt Gold Cup Trophy with Bomar Rear Sight Cut
  • Colt Gold Cup National Match .45acp
  • Colt Gold Cup National Match 9mm
  • Springfield TRP Operator
  • Dan Wesson Bruin (may require fitting due to the Clark cut on the top of the slide)

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-48 X .313 Set Screw
Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR

The screws that are included with this mount require a 5/64'' allen wrench for installation.

 

 

Short Description:

Mounting Hardware is Included

This sight fits (including but not limited to):
STI Edge (either this sight or LPA)
Les Baer 1911 (adjustable rear sights)
Colt Gold Cup Trophy with Bomar Rear

Specifications:

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"

Mounting Hardware:
(2) 6-32 Flat Head

Scope Mount Color:
Black Hardcoat Anodized Type III
Material:
7075 Aluminum
Model:
Bomar Rear Sight Cut
Brand:
1911
Brand:
Colt
Brand:
Dan Wesson
Brand:
Springfield
Brand:
STI (Staccato)
Red Dot Brand:
Holosun 507C
Red Dot Brand:
Holosun 508T
Red Dot Brand:
Holosun 407C
Red Dot Brand:
Trijicon SRO
Red Dot Brand:
Swampfox Justice
Red Dot Brand:
Swampfox Liberty
Red Dot Brand:
Swampfox Kingslayer
Red Dot Brand:
Viridian RFX35
Red Dot Brand:
Bushnell RXM-300
Red Dot Brand:
ADE Advanced Optics RD3 (Stingray, Raptor, Valkyrie)
Red Dot Brand:
Trijicon RMR HD
Red Dot Brand:
Holosun HS507Comp
Red Dot Brand:
Swampfox Justice II
Red Dot Brand:
Swampfox Liberty II
GTIN:
841370116775
Brand:
Bomar