EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for HK USP

Mounting Hardware is Included

This mount fits:

• USP Tactical 9mm
• USP Tactical .45 ACP
• USP 9mm
• USP 40 S&W
• USP .45 ACP

This mount does not fit:

• USP Compact (rear sight cut depth is .200" instead of .160")
• USP Expert
• USP Elite
• VP9
• VP40
• P30
• P30L
• P30SK
• HK45
• HK45C

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, HS407A3 X2, Swampfox Kingslayer / Liberty / Justice

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws - Provided for Trijicon RMR

The screws that are included with this mount require a 5/64'' allen wrench for installation.