Mounting Hardware is Included
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.
This mount fits:
Walther PPQ Classic (M1)
Walther PPQ M2 (All models except optics ready and .22lr)
Walther PPQ 45
Walther PPQ 45 SD
Walther PPQ Sub Compact
Walther P99 (All Models)
Walther PPX (All Models)
Walther Creed
Walther Creed 10 Round
Walther PPS (All Models)
Walther PPS M2 (All Models)
This mount does not fit:
Walther PPQ 22
Walther PPQ Q4 Tac (optics ready)
Walther Q5 Match (optics ready)
Walther Q5 Match SF Arabesque
Walther Q5 Match SF Patriot
Walther Q5 Match SF Black Diamond
Walther Q5 Match SF Match Black Tie
Walther P2
Does not work on the PPS and or other Walther models that have the sight rib on top of the slide
*For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing.
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws
Red Dot Fitment:
- Vortex Defender Series (Defender XL requires the screws provided by Vortex)
- Vortex Venom (Enclosed Red Dot)
- OSight SE
- Bushnell RXS-100
- Crimson Trace CTS-1500
- Holosun 407K*
- Holosun 407k-GR
- Holosun 507K*
- Holosun 507k-GR
- Holosun EPS-GR*
- Holosun EPS-RD*
- Holosun EPS-Carry-GR*
- Holosun EPS-Carry-RD*
- Jpoint
- Leupold Delta Point Pro
- Optima
- Redfield Accelerator
- Shield RMS
- Shield RMSc
- Shield SMS
- Sig Romeo Zero
Any Walther model that comes with the standard sights that have the detent will work with this mount. This mount now comes with a set screw allowing it to be used with the friction fit dovetails.
The PPQ sight has a hole drilled in the bottom of the dovetail to accomodate the plunger on some models of the Walthers.
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.
|
Short Description:
|
Mounting Hardware is Included This mount fits: |
|
Specifications:
|
Material: 7075 Aluminum |
|
Scope Mount Color:
|
Black Hardcoat Anodized Type III
|
|
Material:
|
7075 Aluminum
|
|
Model:
|
PPQ M2
|
|
Brand:
|
Walther
|
|
Red Dot Brand:
|
Bushnell RXS-100
|
|
Red Dot Brand:
|
Crimson Trace CTS-1500
|
|
Red Dot Brand:
|
Holosun 407K
|
|
Red Dot Brand:
|
Holosun 407k-GR
|
|
Red Dot Brand:
|
Holosun 507K
|
|
Red Dot Brand:
|
Holosun 507k-GR
|
|
Red Dot Brand:
|
Holosun EPS-GR
|
|
Red Dot Brand:
|
Holosun EPS-RD
|
|
Red Dot Brand:
|
Holosun EPS-Carry-GR
|
|
Red Dot Brand:
|
Holosun EPS-Carry-RD
|
|
Red Dot Brand:
|
Jpoint
|
|
Red Dot Brand:
|
Leupold Delta Point Pro
|
|
Red Dot Brand:
|
Optima
|
|
Red Dot Brand:
|
Redfield Accelerator
|
|
Red Dot Brand:
|
Shield RMS
|
|
Red Dot Brand:
|
Shield RMSc
|
|
Red Dot Brand:
|
Shield SMS
|
|
Red Dot Brand:
|
Sig Romeo Zero
|
|
Red Dot Brand:
|
Vortex Defender Series
|
|
GTIN:
|
841370116850
|
