**Requires second screw hole to be drilled and tapped if using on 2020 or newer Colt Python**
This mount fits:
Colt Anaconda (fits 2020 and newer models)
Colt Python (fits 2020 and newer models if the second screw hole is drilled and tapped in the top strap)
Torque 6-40 x 3/8 mounting screw to 20 in/lbs
Torque 4-48 x 3/8 mounting screw to 10 in/lbs
Torque 6-32 red dot mounting screws to 15 in/lbs
Some newer Pythons are only drilled and tapped for one screw on the top strap, if your gun only has one hole on the top strap, this mount WILL NOT WORK.
This is for Colt models with the Elliason style adjustable rear sight.
Specifications
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"
Mounting Hardware:
(2) 6-32 x 7/16" Flat Head Screws
(1) 6-40 x 3/8 Flat Head Screw
(1) 4-48 x 3/8 Flat Head Screw
Red Dot Fitment:
- Vortex Defender Series (Defender XL requires the screws provided by Vortex)
- Vortex Venom (Enclosed Red Dot)
- OSight SE
- Bushnell RXS-100
- Crimson Trace CTS-1500
- Holosun 407K*
- Holosun 407k-GR
- Holosun 507K*
- Holosun 507k-GR
- Holosun EPS-GR*
- Holosun EPS-RD*
- Holosun EPS-Carry-GR*
- Holosun EPS-Carry-RD*
- Jpoint
- Leupold Delta Point Pro
- Optima
- Redfield Accelerator
- Shield RMS
- Shield RMSc
- Shield SMS
- Sig Romeo Zero
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.
|
Short Description:
|
Mounting hardware is included. This mount fits: |
|
Specifications:
|
Material: 7075 Aluminum |
|
Scope Mount Color:
|
Black Hardcoat Anodized Type III
|
|
Material:
|
7075 Aluminum
|
|
Model:
|
Anaconda
|
|
Red Dot Brand:
|
Bushnell RXS-100
|
|
Red Dot Brand:
|
Crimson Trace CTS-1500
|
|
Red Dot Brand:
|
Holosun 407K
|
|
Red Dot Brand:
|
Holosun 407k-GR
|
|
Red Dot Brand:
|
Holosun 507K
|
|
Red Dot Brand:
|
Holosun 507k-GR
|
|
Red Dot Brand:
|
Holosun EPS-GR
|
|
Red Dot Brand:
|
Holosun EPS-RD
|
|
Red Dot Brand:
|
Holosun EPS-Carry-GR
|
|
Red Dot Brand:
|
Holosun EPS-Carry-RD
|
|
Red Dot Brand:
|
Jpoint
|
|
Red Dot Brand:
|
Leupold Delta Point Pro
|
|
Red Dot Brand:
|
Optima
|
|
Red Dot Brand:
|
Redfield Accelerator
|
|
Red Dot Brand:
|
Shield RMS
|
|
Red Dot Brand:
|
Shield RMSc
|
|
Red Dot Brand:
|
Shield SMS
|
|
Red Dot Brand:
|
Sig Romeo Zero
|
|
Red Dot Brand:
|
Vortex Defender Series
|
|
Model:
|
Python
|
|
Brand:
|
Colt
|
