BLEMISHED: Trijicon RMR / SRO | Holosun 507c Sight Mount for HK VP9 | VP9SK | P30 | P30L | P30SK | HK45 | HK45C | VP40

FULLY FUNCTIONAL EGW 49507. RMR IS A STORE DEMO WITH BLEMISHES. FINAL SALE

his Mount Fits:

• H&K VP9
• H&K VP9SK
• H&K VP40
• H&K P30
• H&K P30L
• H&K P30SK
• H&K 45
• H&K 45C

This mount is not intended for use with the optics ready version of these pistols. The optics ready version can be found here.

This mount does not fit:

• HK USP
• Any Optics Ready H&K Pistol

• Material: 7075 Aluminum
  Coating: Matte Black Hardcoat
  Overall Length: 1.604"
  Overall Width: .99"
  Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
  Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, HS407A3 X2, Swampfox Kingslayer / Liberty / Justice

  Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
  
  

  HK VP9 Red Dot Mount Installation Instructions

  1. Remove the rear sight*
  2. Install the EGW Sight Mount in the dovetail
  3. Tighten set screw (if applicable)
  4. Place the red dot sight on the EGW Sight Mount
     (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
  5. Apply blue Loctite to the provided mounting screws
  6. Torque mounting screws to 15in/lbs

  2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
  2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights

  
  The screws that are included with this mount require a 5/64'' allen wrench for installation.